| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Waverly tuner installation http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=42112 |
Page 1 of 1 |
| Author: | ZekeM [ Wed Dec 04, 2013 12:44 pm ] |
| Post subject: | Waverly tuner installation |
Ok I'm ready to drill the holes in the headstock for the tuners. Problem is I've never used a bushing style tuner before. Up to this point I've only used Grover and Gotoh tuners. So my question is how do YOU install bushing style tuners. Drill the shaft hole and then come back and use a slightly undersized counterbore for the bushing side?? Do you trust a press fit on the bushing or do you add a drop of glue to be safe? What kinda glue is best for that, if you use it? Thanks guys |
|
| Author: | jackwilliams [ Wed Dec 04, 2013 1:23 pm ] |
| Post subject: | Re: Waverly tuner installation |
StewMac # 2062 http://www.stewmac.com/shop/Tools/Reame ... 1&xsr=0460 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|